Motor Guard |

Part # BGR6-1 | Line Code: MTG

$11.39

Big-block rigid sanding block 2-5/8 x 5-1/2 in

An ultra-flat super rigid block for use with 2-3/4 PSA rolls or half-sheets with no waste. Finger recesses on the sides allow for a firm yet powerful grip while tackling the toughest jobs.

Not Fitted / Universal

Part # MS2015 | Line Code: MTG

$46.49

Magna stakes m-shape pk/100

M-Shaped Magna-Stakes for repair of tabs and thin sections. Clamshell of 100 replacement stakes for Motor Guard Magna-Stitcher plastic repair tools.

Not Fitted / Universal

Part # RKH-1 | Line Code: MTG

$10.89

Rocker block hook faced sanding block

This unique block utilizes standard 6" Loop-Faced discs for all jobs from rough sanding to final finish sanding. Exclusive radius edge wraps paper cleanly for even sanding. Multi-layer design elimates the transfer of finger marks.

Not Fitted / Universal

Part # AP-3 | Line Code: MTG

$87.99

Sanding block assortment of 8

An assortment of eight of Motor Guard's most popular sanding blocks. Includes SB-1, HT-1, MB-1, WB-1, RK-1, RL-1, BG6-1 and BG12-1.

Not Fitted / Universal

Part # FB-1 | Line Code: MTG

$8.19

Flexi-block sanding block rectangular shape

Flexi-Blocks are flexible sanding bars for detail sanding applications. These blocks are constructed of a dense yet flexible compound that allows bending to suit body profiles while maintaining a firm and durable backing for highly effective sanding.

Not Fitted / Universal

Part # J20017 | Line Code: MTG

$73.99

Magna t-puller

This unique and time-saving accessory allows light hand pulling with the Motor Guard Magna-Spot Stud Welder Kit. The serrated thumb wheel grips pins securely while the padded T-handle allows for a firm and comfortable grip while pulling. Maximum control is maintained as small dents and dings are worked out by hand. From Pulling to Painting, Motor Guard has a product for all of your autobody repair and refinishing needs.

Not Fitted / Universal

Part # D-12-1CJ | Line Code: MTG

$8.99

Spray gun filter

This is the filter that ends painting failures by absorbing oil aerosols, condensed moisture, and contaminants as small as .01 microns. It attaches directly to the air inlet of the spray gun, and as air is passed between the patented spiral wound elements compressed layers, particles as small as .01 micron are entrapped. This incredible filtration is accomplished at a true 30 CFM to the spray gun. All this, while at the same time providing maximum efficiency, with a minimal pressure drop at the optimum flow rate. Eliminate painting failures with the D-12 by removing wet, dirty, damaging air. Holds more moisture with a lower pressure drop at the highest flow rate available. Designed to remove the smallest contaminant particle, oil-aerosol or drop of moisture to supply Clean, Dry, Oil-Free air to the spray gun. Users of the D-12 report reduced paint defects, resulting in increased Paint Department productivity with the ultimate final finishes.

Not Fitted / Universal

Part # E-5000 | Line Code: MTG

$16.99

Adhesive eraser wheel

Replacement wheel for E-5000S-2 Stripe Eracer System

Not Fitted / Universal

Part # JMC002 | Line Code: MTG

$31.99

Replacement cutter pack of 3

Package of 3 replacment cutters for Motor Guard JMC001/JMD001 Magna Spot Weld Cutters. High-quality U.S. steel with double end for extended life.

Not Fitted / Universal

Part # J20014 | Line Code: MTG

$22.99

Magna-spot draw pin 2.0mm pk/500

Motor Guard Magna-Spot Draw Pins made of copper-coated steel are soft for easy flexing and grinding but deliver a 500 lb. pull. Packaged in a convenient, re-closable clamshell package. For use on all brands of stud welders.

Not Fitted / Universal

Part # MS-2500 | Line Code: MTG

$204.99

Magna stitcher plastic repair system 120v

The Motor Guard MS-2500 Magna-Stitcher Plastic Repair System is used to make permanent structural repairs to bumpers, fascias, spoilers, panel tabs, headlamp assemblies, radiator brackets and all thermoplastic parts. The MS-2500 includes an assortment of (4) Stainless Steel Magna-Stakes and features (3) power levels to tackle any repair job. The Magna-Stitcher works by inserting a rigid stainless steel stake into the surface of the plastic resulting in a permanent repair of the crack. Repairs can be made on flat surfaces, tabs, holes, ribs, inside and outside corners. Once the back of the broken part is stitched, body repair can be completed on the outside of the part as needed. Made in USA.

Not Fitted / Universal

Part # J20007 | Line Code: MTG

$20.99

Magna-spot stud electrode

Replacement Stud Electrode fits all Motor Guard Magna-Spot Studwelders

Not Fitted / Universal

Filter

Parts Catalog