BUY ONLINE - PICK UP IN STORE
Error Storing Vehicle
directions_car close
keyboard_arrow_right
keyboard_arrow_right

S & G Tool Aid Corp

88 Results
Engine Oil Pressure Tester Kit S & G Tool Aid Corp 34550
Part # 34550 | Line Code: SGT
$127.99
Auto. Trans. & engine oil pres. Tester with 2 gages
Auto. Trans. & engine oil pres. Tester with 2 gages
Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Includes two gages: Large Gage calibrated from 1-600 PSI (0-4,000 kPa & 0-7.0 BAR) and Small Gage for lower pressure requirement 0-50 PSI (0-3.5 BAR) Large gage can be used for all applications and has hang-up hook. Small gage is for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 PSI (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a durable vinyl pouch.
help
Check Fitment
keyboard_arrow_right
Auto. Trans. & engine oil pres. Tester with 2 gages
Auto. Trans. & engine oil pres. Tester with 2 gages
Check oil pressure in automotive transmissions and engines. Adapters provide coverage of most domestic and imported cars and light trucks. Includes two gages: Large Gage calibrated from 1-600 PSI (0-4,000 kPa & 0-7.0 BAR) and Small Gage for lower pressure requirement 0-50 PSI (0-3.5 BAR) Large gage can be used for all applications and has hang-up hook. Small gage is for more accurate reading of engine oil pressure where maximum oil pressure does not exceed 50 PSI (3.5 BAR). Includes 6 feet of oil proof hose and 10 assorted fittings. Supplied with instructions in a durable vinyl pouch.
help
Check Fitment
keyboard_arrow_right
Part # 34550 | Line Code: SGT
Hose Clamp Pliers S & G Tool Aid Corp 19780
Part # 19780 | Line Code: SGT
$30.99
Hose clamping pliers set
Hose clamping pliers set
Use to clamp fuel injection, brake, vacuum and cooling systems hoses. Includes one each small, medium and large Hose Clamp Pliers in high visibility yellow. Smooth, rounded jaws prevent hose damage. Lightweight and non-metallic. Locks in closed position. Fast and easy to use. Hose Clamp Pliers are available individually: 19790, Small Hose Clamp Pliers with a 1/8" - 5/16" range; 19791, Medium Hose Clamp Pliers with a 1/2" - 3/4" range; and 19792, Large Hose Clamp Pliers with a 3/4" - 2 1/4" range.
help
Check Fitment
keyboard_arrow_right
Hose clamping pliers set
Hose clamping pliers set
Use to clamp fuel injection, brake, vacuum and cooling systems hoses. Includes one each small, medium and large Hose Clamp Pliers in high visibility yellow. Smooth, rounded jaws prevent hose damage. Lightweight and non-metallic. Locks in closed position. Fast and easy to use. Hose Clamp Pliers are available individually: 19790, Small Hose Clamp Pliers with a 1/8" - 5/16" range; 19791, Medium Hose Clamp Pliers with a 1/2" - 3/4" range; and 19792, Large Hose Clamp Pliers with a 3/4" - 2 1/4" range.
help
Check Fitment
keyboard_arrow_right
Part # 19780 | Line Code: SGT
Slide Hammer S & G Tool Aid Corp 81200
Part # 81200 | Line Code: SGT
$105.99
Midi-weight 5 lbs. Slide hammer & dent puller
Midi-weight 5 lbs. Slide hammer & dent puller
Provides excellent balance with 5 lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Designed for that in-between job where the 10 lb. slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8"-18.
help
Check Fitment
keyboard_arrow_right
Midi-weight 5 lbs. Slide hammer & dent puller
Midi-weight 5 lbs. Slide hammer & dent puller
Provides excellent balance with 5 lb. slide weight on plated, solid, 5/8" shaft. Exclusive soft cushion vinyl grip with "Hang-It" hole absorbs shock. Broached nose cone locks puller screw firmly in place. Supplied with body hook of heavy duty aircraft steel for pulling out curled and creased edges and panels. Helps in aligning hood and trunk hinges. Designed for that in-between job where the 10 lb. slide weight is too heavy and the pullers with 3 lb. weights are too light. Nose cone and shaft threads are 5/8"-18.
help
Check Fitment
keyboard_arrow_right
Part # 81200 | Line Code: SGT
Wheel Alignment Tool S & G Tool Aid Corp 61800
Part # 61800 | Line Code: SGT
$52.99
Strut alignment level
Strut alignment level
Use this simple level to restore a vehicle's camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Also useful for repairs on CV joints, ball joints and tie rod ends. Features includes: Super strong magnet - mounts on brake rotor, spindle or steering knuckle. Easy to read, unbreakable bubble level. Camber settings from -3° to +3° for additional adjustment. Works on all vehicles equipped with MacPherson struts. Can remain on the vehicle during repair or can be removed. Easy to use - (1)Place on rotor before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.
help
Check Fitment
keyboard_arrow_right
Strut alignment level
Strut alignment level
Use this simple level to restore a vehicle's camber setting after strut repair or installation. Allows technician or customer to safely drive the vehicle before a more precise wheel alignment can be performed. Also useful for repairs on CV joints, ball joints and tie rod ends. Features includes: Super strong magnet - mounts on brake rotor, spindle or steering knuckle. Easy to read, unbreakable bubble level. Camber settings from -3° to +3° for additional adjustment. Works on all vehicles equipped with MacPherson struts. Can remain on the vehicle during repair or can be removed. Easy to use - (1)Place on rotor before repair and zero the level. (2)Tighten the wing nut. (3)After the repair, push or pull on the strut until the level returns to the zero position.
help
Check Fitment
keyboard_arrow_right
Part # 61800 | Line Code: SGT
Crimping Tool S & G Tool Aid Corp 18915
Part # 18915 | Line Code: SGT
$43.99
Terminal crimper for weather pack & metri pack terminals 12-22 awg
Terminal crimper for weather pack & metri pack terminals 12-22 awg
help
Check Fitment
keyboard_arrow_right
Terminal crimper for weather pack & metri pack terminals 12-22 awg
Terminal crimper for weather pack & metri pack terminals 12-22 awg
help
Check Fitment
keyboard_arrow_right
Part # 18915 | Line Code: SGT
Air Hammer Chisel S & G Tool Aid Corp 91140
Part # 91140 | Line Code: SGT
$43.99
Long pneumatic hammer
Long pneumatic hammer
Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Polished face is 1" diameter. 7" overall length to access hard to reach areas. .401" Parker shank.
help
Check Fitment
keyboard_arrow_right
Long pneumatic hammer
Long pneumatic hammer
Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Polished face is 1" diameter. 7" overall length to access hard to reach areas. .401" Parker shank.
help
Check Fitment
keyboard_arrow_right
Part # 91140 | Line Code: SGT
Cut-Off Wheel S & G Tool Aid Corp 94930
Part # 94930 | Line Code: SGT
$209.99
Cut-off wheels 3" x 1/32" x 3/8" hole-100 per box
Cut-off wheels 3" x 1/32" x 3/8" hole-100 per box
Cut-Off Wheels are 3" diameter x 1/32" thickness x 3/8" center hole diameter, packed 100 per box. Abrasive reinforced wheels are ideal for automotive and autobody repair. Cut all ferrous materials with ease - cut through clamps, hangars, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts. Easier and safer to control than a torch, faster and less effort than a hacksaw. Wheels comply with American National Standards Institute Code B7.1 (1968 Rev.) and OSHA. Rated 25,000 RPM maximum speed (Pneumatic cutting tool should have safety guard).
help
Check Fitment
keyboard_arrow_right
Cut-off wheels 3" x 1/32" x 3/8" hole-100 per box
Cut-off wheels 3" x 1/32" x 3/8" hole-100 per box
Cut-Off Wheels are 3" diameter x 1/32" thickness x 3/8" center hole diameter, packed 100 per box. Abrasive reinforced wheels are ideal for automotive and autobody repair. Cut all ferrous materials with ease - cut through clamps, hangars, sheet metal, angle iron, tubing, castings, mufflers and rusted bolts. Easier and safer to control than a torch, faster and less effort than a hacksaw. Wheels comply with American National Standards Institute Code B7.1 (1968 Rev.) and OSHA. Rated 25,000 RPM maximum speed (Pneumatic cutting tool should have safety guard).
help
Check Fitment
keyboard_arrow_right
Part # 94930 | Line Code: SGT
Reciprocating Saw Bit S & G Tool Aid Corp 90000
Part # 90000 | Line Code: SGT
$19.99
Reciprocating air saw blades, 3" scroll x 18 tpi (pkg of 5)
Reciprocating air saw blades, 3" scroll x 18 tpi (pkg of 5)
3" long scroll blade has 18 teeth per inch. For fine cutting of material over 1/8" thick. Use to cut through a variety of metals, fiberglass and plastic Bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual set screw blade retention. Maximum speed is 10,000 strokes per minute. Packed 5 blades per display pouch.
help
Check Fitment
keyboard_arrow_right
Reciprocating air saw blades, 3" scroll x 18 tpi (pkg of 5)
Reciprocating air saw blades, 3" scroll x 18 tpi (pkg of 5)
3" long scroll blade has 18 teeth per inch. For fine cutting of material over 1/8" thick. Use to cut through a variety of metals, fiberglass and plastic Bi-metal blades contain cobalt for long lasting, shatterproof use. Fits Chicago Pneumatic, CIA, Florida Pneumatic, Ingersoll-Rand, Mac, Sears, Snap-on and any other air saw with dual set screw blade retention. Maximum speed is 10,000 strokes per minute. Packed 5 blades per display pouch.
help
Check Fitment
keyboard_arrow_right
Part # 90000 | Line Code: SGT
Electrical Connector Separator S & G Tool Aid Corp 18580
Part # 18580 | Line Code: SGT
$12.99
Release tool for weather pack terminals
Release tool for weather pack terminals
Quickly and easily depresses the terminal retention tabs to allow the terminal to be removed from the connector when repairing wiring harnesses. Use with three sizes of Weahter Pack terminals: 10-12 AWG, 14-16 AWG and 18-22 AWG. Can also be used to restore the tabs to their original position.
help
Check Fitment
keyboard_arrow_right
Release tool for weather pack terminals
Release tool for weather pack terminals
Quickly and easily depresses the terminal retention tabs to allow the terminal to be removed from the connector when repairing wiring harnesses. Use with three sizes of Weahter Pack terminals: 10-12 AWG, 14-16 AWG and 18-22 AWG. Can also be used to restore the tabs to their original position.
help
Check Fitment
keyboard_arrow_right
Part # 18580 | Line Code: SGT
Heat Shrink Tube Assortment S & G Tool Aid Corp 23250
Part # 23250 | Line Code: SGT
$25.99
Heat shrink tubes assortment
Heat shrink tubes assortment
Versatile heat shrink tubes for use in a wide variety of applications in automotive, marine, electrical, industrial, home and more. 160 assorted pieces in 5 colors and 8 sizes: 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8" & 3/4". Easily shrinks with a Heat Gun or other heat source. Protects solder joints and wires. Forms a secure bond over smooth and irregular shapes. Excellent for insulation, strain relief, abrasion shielding and corrosion protection. Shrink tubes made of polyolefin material. Ideal for color coding and bundling. 2:1 shrink ratio.
help
Check Fitment
keyboard_arrow_right
Heat shrink tubes assortment
Heat shrink tubes assortment
Versatile heat shrink tubes for use in a wide variety of applications in automotive, marine, electrical, industrial, home and more. 160 assorted pieces in 5 colors and 8 sizes: 3/32", 1/8", 3/16", 1/4", 3/8", 1/2", 5/8" & 3/4". Easily shrinks with a Heat Gun or other heat source. Protects solder joints and wires. Forms a secure bond over smooth and irregular shapes. Excellent for insulation, strain relief, abrasion shielding and corrosion protection. Shrink tubes made of polyolefin material. Ideal for color coding and bundling. 2:1 shrink ratio.
help
Check Fitment
keyboard_arrow_right
Part # 23250 | Line Code: SGT
Heat Shrink Tube Assortment S & G Tool Aid Corp 23221
Part # 23221 | Line Code: SGT
$8.99
3/16" double wall adhesive heat shrink tubes per bag of 20
3/16" double wall adhesive heat shrink tubes per bag of 20
help
Check Fitment
keyboard_arrow_right
3/16" double wall adhesive heat shrink tubes per bag of 20
3/16" double wall adhesive heat shrink tubes per bag of 20
help
Check Fitment
keyboard_arrow_right
Part # 23221 | Line Code: SGT
Media Blasting Gun S & G Tool Aid Corp 17800
Part # 17800 | Line Code: SGT
$53.99
Abrasive blaster
Abrasive blaster
Portable and efficient, this tool blasts off rust, scale, carbon, chemicals and paint with ease! Operates on standard compressed air. Has 1/4" Female NPT inlet. Supplied with 10 feet of hose and hardened steel nozzles (two with 13/64" I.D. and two with 1/4" I.D.) Can also be used to blast plain air and/or liquids. Lightweight construction reduces fatigue. Produces a steady stream of abrasive without interruption regardless of height, distance and gravity. Operates with any grade of abrasive. Just place end of Pick-Up tube in bag of abrasive. Requires 1.5 CFM up to 8 CFM of air at 60 to 150 PSI depending on nozzle size used.
help
Check Fitment
keyboard_arrow_right
Abrasive blaster
Abrasive blaster
Portable and efficient, this tool blasts off rust, scale, carbon, chemicals and paint with ease! Operates on standard compressed air. Has 1/4" Female NPT inlet. Supplied with 10 feet of hose and hardened steel nozzles (two with 13/64" I.D. and two with 1/4" I.D.) Can also be used to blast plain air and/or liquids. Lightweight construction reduces fatigue. Produces a steady stream of abrasive without interruption regardless of height, distance and gravity. Operates with any grade of abrasive. Just place end of Pick-Up tube in bag of abrasive. Requires 1.5 CFM up to 8 CFM of air at 60 to 150 PSI depending on nozzle size used.
help
Check Fitment
keyboard_arrow_right
Part # 17800 | Line Code: SGT
Parts Catalog
keyboard_arrow_upBack to Top