Buy Online - Pick Up In Store
Error Storing Vehicle
directions_car close
menu
keyboard_arrow_right
keyboard_arrow_right
Refine Results By

Filter

close
235 Results
Part # 7010134
Parts Master
$7.09
Air accessories-euro-style clip-on chuck (barbed), closed
Air accessories-euro-style clip-on chuck (barbed), closed
AIR ACCESSORIES-EURO-STYLE CLIP-ON CHUCK (BARBED), CLOSED
help
Not Fitted / Universal
Part # 275638
Lincoln Industrial
$24.99
Air tool hose regulator
Air tool hose regulator
help
Not Fitted / Universal
Part # 98350
S & G Tool Aid Corp
$35.99
Diaphragm air regulator
Diaphragm air regulator
For precise air regulation at the spray gun. Delivers constant pressure. For use with all spray guns - conventional and HVLP. Small, lightweight and compact. Inlet is 1/4" NPT Male; outlet is 1/4" NPT Female with swivel connector. 22 CFM capacity. True diaphragm regulator to prevent surges - not a cheater valve. Push/pull lock to set pressure. Gage ranges: 0-160 PSI and 0-11 BAR. Glass lens.
help
Not Fitted / Universal
Part # 91140
S & G Tool Aid Corp
$26.99
Long pneumatic hammer
Long pneumatic hammer
Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Polished face is 1" diameter. 7" overall length to access hard to reach areas. .401" Parker shank.
help
Not Fitted / Universal
Part # 99000
S & G Tool Aid Corp
$17.49
In-line water separator & air filter
In-line water separator & air filter
Removes water and foreign particles from compressed air stream. Attaches directly to paint spray gun or air tool. Clear reservoir shows accumulated water taken out of air line.. Button release valve allows for easy disposal. 1/4" NPT Male inlet x 1/4" NPT Female outlet.
help
Not Fitted / Universal
Part # 99190
S & G Tool Aid Corp
$22.99
In-line blow gun with rubber nozzle
In-line blow gun with rubber nozzle
Mounts permanently in line between air hose and coupler - no need to keep on disconnecting an air tool to hook up a blow gun. Has non-marring rubber tip which can be used to make a tight seal for blowing out air lines. To meet OSHA requirements, air line pressure must be reduced to 30 PSI. Air stream nozzle has a natural angle for easy use. Lightweight and durable. Small, compact and easy to use. 1/4" NPT Female x 1/4" NPT Female.
help
Not Fitted / Universal
Part # 98300
S & G Tool Aid Corp
$17.49
Air adjustment valve with gage for paint spraying
Air adjustment valve with gage for paint spraying
Allows for fine regulation of air entering spray gun. Approximately 2 1/2 turns from fully opened to closed valve. Gage has dual scales - 160 PSI and 11 Kg/Cm2. Inlet is 1/4" NPT Male; outlet is 1/4" NPT Females and swivels.
help
Not Fitted / Universal
Part # 91950
S & G Tool Aid Corp
$23.99
2" wide pneumatic scraper
2" wide pneumatic scraper
Removes gaskets, rust, undercoating and paint. Extra wide blade has slight offset for easy use. .401" Parker shank.
help
Not Fitted / Universal
Part # 98000
S & G Tool Aid Corp
$8.99
Air regulator
Air regulator
Aluminum regulator controls air pressure as needed (Not a shut off valve). Lightweight. Openings: 1/4" NPT Male x 1/4" NPT Female.
help
Not Fitted / Universal
Part # 91125
S & G Tool Aid Corp
$19.99
Smoothing hammer
Smoothing hammer
Use for body forming on fenders, hoods and panels against a body dolly. Excellent for any hammering operations such as ball joints and U-joints. Polished face is 1" diameter. .401" Parker shank.
help
Not Fitted / Universal
Part # 91400
S & G Tool Aid Corp
$15.99
7" flat chisel
7" flat chisel
General purpose cutting chisel. .401" Parker shank.
help
Not Fitted / Universal
Part # 98025
S & G Tool Aid Corp
$8.99
Brass air regulator
Brass air regulator
Brass regulator controls air pressure as needed (Not a shut off valve). Resists oxidation. Openings: 1/4" NPT Male x 1/4" NPT Female.
help
Not Fitted / Universal
Parts Catalog
keyboard_arrow_upBack to Top