This is the filter that ends painting failures by absorbing oil aerosols, condensed moisture, and contaminants as small as .01 microns. It attaches directly to the air inlet of the spray gun, and as air is passed between the patented spiral wound elements compressed layers, particles as small as .01 micron are entrapped. This incredible filtration is accomplished at a true 30 CFM to the spray gun. All this, while at the same time providing maximum efficiency, with a minimal pressure drop at the optimum flow rate. Eliminate painting failures with the D-12 by removing wet, dirty, damaging air. Holds more moisture with a lower pressure drop at the highest flow rate available. Designed to remove the smallest contaminant particle, oil-aerosol or drop of moisture to supply Clean, Dry, Oil-Free air to the spray gun. Users of the D-12 report reduced paint defects, resulting in increased Paint Department productivity with the ultimate final finishes.

Replacement wheel for E-5000S-2 Stripe Eracer System

M-Shaped Magna-Stakes for repair of tabs and thin sections. Clamshell of 100 replacement stakes for Motor Guard Magna-Stitcher plastic repair tools.

This unique block utilizes standard 6" Loop-Faced discs for all jobs from rough sanding to final finish sanding. Exclusive radius edge wraps paper cleanly for even sanding. Multi-layer design elimates the transfer of finger marks.

Flexi-Blocks are flexible sanding bars for detail sanding applications. These blocks are constructed of a dense yet flexible compound that allows bending to suit body profiles while maintaining a firm and durable backing for highly effective sanding.

An assortment of eight of Motor Guard's most popular sanding blocks. Includes SB-1, HT-1, MB-1, WB-1, RK-1, RL-1, BG6-1 and BG12-1.

Flexi-Blocks are flexible sanding bars for detail sanding applications. These blocks are constructed of a dense yet flexible compound that allows bending to suit body profiles while maintaining a firm and durable backing for highly effective sanding.

A soft and flexible scuffing pad designed for areas not suited for ridgid scuffing blocks. This pad is flexible yet evenly distributes pressure over curved surface, imparting an even "tooth" over the entire panel with a single pass.

Motor Guard Sub-Micronic Compressed Air Filters are the ultimate defense against damaging, dirty air. Designed for installation at to the point of use, these filters remove particulates, condensed moisture and oil aerosols down to an incredible .01 microns in size. No other filter on the market provides this level of protection combined with a low pressure drop and ease of use. Produced from environmentally friendly recycled cellulose, the wound element in the Motor Guard filter traps contaminants and absorbs large quantities of moisture and oil. The M-60 model is a high-flow model for direct inline installation on 1/2 inch or larger lines. Mount one at every station to protect tools and other critical applications.

A unique sanding solution for difficult applications, the Memory Block features a firm vinyl side with extreme curving power for areas such as fender crowns and motorcycle tanks. The soft side features an exclusive memory foam that conforms to character lines and reduces pressure over nibs, louvers and other challenging features.

A rigid scuffing pad designed for fast scuffing on flat and semi-flat areas. This pad is fevenly distributes pressure over the surface, imparting an even "tooth" over the entire panel with a single pass.

This unique dual-sided block sands areas where ordinary hard blocks are not as effective. Unique hole side acts as a grater for 30% faster cutting while black side is for less agressive blocking.