| Pulley Diameter MM | 107.95 |
| Heavy Duty Supplier | Yes |
| Compatible Refrigerant Oil Type | PAG 46 |
| Pulley Ridge Diameter | 4.250 |
| Mounting Hardware? | Not Included |
| Ctch Dia. MM Prmy | 107.950 |
| Pulley Diameter IN | 4.250 |
| Clutch Included | Included |
| Switch Included | No |
| Pulley Belt Type | Serpentine |
| Compressor Type | 10S17F |
| Terminal Type | Pin |
| Oil Type | PAG 46 |
| Connector Shape | pin |
| Mounting Type | Tangent Mount |
| Pulley Lip Diameter | 4.250 |
| Distance From Clutch To Mounting Flange | 0.66 |
| Clutch Pulley Diameter | 4.250 |
| O-Ring B Number/Desc | 24402 / Slim Line Sealing Washer |
| Groove | 4 |
| California Proposition 65 | WARNING: This product contains a chemical known to the State of California to cause cancer and birth defects or other reproductive harm. |
| O-Ring A Number/Desc | 24404 / Slim Line Sealing Washer |
| Pulley Groove Quantity | 4 |
| Coil Clock Position | 1 Wire Lead |
| Distance Between Mounting Holes | 16.51 |
| Description | Compressors - Reman |
| New or Reman | Remanufactured |
| Mount Distance MM | 16.51 |
| Belt Type | Serpentine |
| Mount Type | Tangent Mount |
| Connector Type | pin |
| Style | Piston |
| Outside Pulley Diameter | 4.250 |
| O-Ring A Quantity | 1 |
| Oil Filled | Included |
| Mount Distance IN | 0.66 |
| Coil Clock | 1 Wire Lead |
| Discharge Port Type | Sealing Washer |
| Printed Foot Note | May Require use of OE Manifold; DeSlugger [36141] Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor |
| Switch Type | N/A |
| Mounting Hardware Included | No |
| Part Note | May Require use of OE Manifold; DeSlugger 36141 Recommended to Eliminate Compressor Damage on Vehicles with Low Mount Compressor |
| Refrigerant Type | R134a |
| Clutch Maximum Diameter | 4.250 |
| O-Ring B Quantity | 1 |
| Type | Denso |
| Electronic Control Valve | No |
| Coil Voltage | 12 |
| Model | 10S17F |
| Suction Port Type | Sealing Washer |
| Part Terminology | A/C Compressor |
